Danfoss TripleLynx CN Instalační manuál stáhnout pdf (Strana 221)

Solar-Log1000: Configuration at the unit

Defining system groups (Basic/Groups)

Solar-Log

1000/500/200

Installation 221 of 268

– DNS Server

In some networks, the DNS server is a separate address for resolving in-

ternet addresses, and is not the same as the internet router (gateway).

In this case, tick the checkbox and enter the IP address of the DNS

server.

Procedure

1 Enter all the relevant data (see above list)

2 Touch Save

10.7 Defining system groups (Basic/Groups)

As Solar-Log

1000

can manage up to 100 connected inverters, it is useful to di-

vide these into groups. To give a clearer overview, these system groups are

then presented in all selection dialogue boxes.

Up to 10 system groups can be defined, each containing up to 15 inverters:

Each system group can also be shown on a special large display (Page 241).

However, individual inverters can still be selected from the group concerned.

 In the menu, select Config./Basic/Groups

 A dialogue box opens for defining the system groups.

Dialogue boxes

 All inverters belong to one system

If this option is enabled, the inverters are not divided into groups and can

be accessed individually.

 Inverters are divided into groups

If this option is enabled, one or more groups have to be defined.

Procedure

1 Enable the desired option (see above list)

2 To define groups

(Option Inverters are divided into groups has been enabled):

Touch Group definition

 A selection list is displayed

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 267 268

Žádné komentáře

Danfoss TripleLynx CN Instalační manuál Strana 221