Danfoss DLX 4.6 Uživatelská příručka Strana 56

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 86
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 55
56 User Guide DLX Series L00410623-1
Figure 6.2.7: Submenus to Status
Up or Down – Navigate through the
submenus/values
Enter – Select submenu/confirm
6.1.3.1. Active Alarms
Active Alarms displays detailed information about the current operating mode - and status
signs appearing in the upper left corner of the Home screen. Refer also to 7.2. Table of
Events.
6.1.3.2. Inverter Status
Inverter Status displays the operating mode, status and operating parameters of the
inverter.
Inverter Mode
The inverter has 8 different modes. Refer to Table 6.3
Inverter Error
The inverter has 3 different status levels. Refer to Table 6.2
Input Parameters
Current, voltage and power fed from the PV modules to the inverter
Output Parameters
Current, voltage, frequency and power fed from the inverter to the grid
Inverter Peak Power
Highest power achieved throughout the day
Energy produced today
Total energy harvest throughout the day
Temperature
Temperature inside the inverter
Isolation Resistance
Level for a safe insulation between DC - and AC side to prevent injury or
equipment failure. The resistance must be minimum 600 kΩ
Operating Hours
Total inverter running time from Start Up
Apparent Power (VA)
The product of voltage and current from the inverter [VA]
Reactive Power (VAr)
Reactive power produced by the inverter [VAr]
Cos Phi
Ratio between active and apparent power from the inverter
6.1.3.3. Plant Status
Plant Status displays the operating mode, status and operating parameters of the plant.
Plant Mode
The plant has 8 different modes. Refer to Table 6.3
Plant Status (Error)
The plant has 3 different status levels. Refer to Table 6.2
Number of inverters
Total number of inverters in the plant
Number of active inverters
Number of active inverters in the plant
Number of inverter alarms
Event alarms in the plant
Number of inverter warnings
Event warnings in the plant
Input Current
Total current from the PV modules to the inverters
Input Power
Total power from the PV modules to the inverters
Output Current
Total feed-in current to the grid from all active inverters
Output Voltage
Total feed-in voltage to the grid from all active inverters
Zobrazit stránku 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 85 86

Komentáře k této Příručce

Žádné komentáře