Danfoss TripleLynx CN Servisní příručka stáhnout pdf (Strana 74)

Illustration 8.6: Set Date

Set date as prompted by the display. Press

'OK' to select. Press ‘

▲

’ to scroll up through

the numbers. Select by pressing 'OK'.

Chinese date format: yyyy-mm-dd.

Illustration 8.7: Installed PV Power

Enter the amount of installed PV power for

each of the PV inputs. When two or more PV

inputs are connected in parallel, each PV in-

put in the parallel group must be set to the

total amount of PV power installed to that

group divided by the number of parallel in-

puts. See the table below for examples of in-

stalled PV power.

Illustration 8.8: Select Grid Code

The display will now show “Select grid”. The

grid code is set to “undefined” at initial start-

up. To select grid code, press 'OK'. Press ‘

▼

’ to scroll down through the list of coun-

tries. Select the grid code for the installation

by pressing ‘OK’. To meet medium-voltage

grid requirements select a grid code ending

in MV. It is very important that the correct

grid code is chosen.

8. User Interface

L00410582-01_02 73

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 105 106

Žádné komentáře

Danfoss TripleLynx CN Servisní příručka Strana 74