Danfoss 102 Specifikace Strana 42

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 190
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 41
Function Paramete
r
Setting
Set acceptable limits for
the motor speed.
4-12
4-14
4-19
10 Hz, Motor min speed
50 Hz, Motor max speed
50 Hz, Drive max output
frequency
Switch from open loop to
closed loop.
1-00
[3] Closed Loop
4) Configure the feedback to the PID controller.
Select the appropriate
reference/feedback unit.
20-12
[71] Bar
5) Configure the set-point reference for the PID controller.
Set acceptable limits for
the set-point reference.
20-13
20-14
0 Bar
10 Bar
Select current or voltage by switches S201 / S202
6) Scale the analog inputs used for set-point reference and
feedback.
Scale Analog Input 53 for
the pressure range of the
potentiometer (0 - 10 Bar,
0 - 10 V).
6-10
6-11
6-14
6-15
0 V
10 V (default)
0 Bar
10 Bar
Scale Analog Input 54 for
pressure sensor (0 - 10
Bar, 4 - 20 mA)
6-22
6-23
6-24
6-25
4 mA
20 mA (default)
0 Bar
10 Bar
7) Tune the PID controller parameters.
Adjust the frequency
converter’s Closed Loop
Controller, if needed.
20-93
20-94
See Optimisation of the
PID Controller, below.
8) Save to finish.
Save the parameter
setting to the LCP for safe
keeping
0-50
[1] All to LCP
Table 2.15 Programming Order
2.8.12
Tuning the Frequency Converter
Closed Loop Controller
Once the frequency converter's closed loop controller has
been set up, the performance of the controller should be
tested. In many cases, its performance may be acceptable
using the default values of 20-93 PID Proportional Gain and
20-94 PID Integral Time. However, in some cases it may be
helpful to optimise these parameter values to provide
faster system response while still controlling speed
overshoot.
2.8.13
Manual PID Adjustment
1. Start the motor.
2.
Set 20-93 PID Proportional Gain to 0.3 and
increase it until the feedback signal begins to
oscillate. If necessary, start and stop the
frequency converter or make step changes in the
set-point reference to attempt to cause
oscillation. Next reduce the PID proportional gain
until the feedback signal stabilizes. Then reduce
the proportional gain by 40-60%.
3.
Set 20-94 PID Integral Time to 20 s and reduce it
until the feedback signal begins to oscillate. If
necessary, start and stop the frequency converter
or make step changes in the set-point reference
to attempt to cause oscillation. Next, increase the
PID integral time until the feedback signal
stabilizes. Then increase of the integral time by
15-50%.
4.
20-95 PID Differentiation Time should only be used
for very fast-acting systems. The typical value is
25% of 20-94 PID Integral Time. The differential
function should only be used when the setting of
the proportional gain and the integral time has
been fully optimised. Make sure that oscillations
of the feedback signal are sufficiently dampened
by the low-pass filter for the feedback signal
(parameters 6-16, 6-26, 5-54 or 5-59 as required).
Introduction to VLT® HVAC D... Design Guide
40 Danfoss A/S © Rev. 06/2014 All rights reserved. MG11BC02
22
Zobrazit stránku 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 189 190

Komentáře k této Příručce

Žádné komentáře

Sony NWZS739FB manuales

Manuales del propietario y guías del usuario para Reproductores de cd Sony NWZS739FB.
Ofrecemos manuales en pdf Sony NWZS739FB para descargar gratis por tipos de documentos:






Más productos y manuales para Reproductores de cd Sony

Modelos Tipo de documento
CDX-V58MP Manual de usuario   Sony CDX-V58MP User's Manual, 4 paginas
D-VJ85 Manual de usuario   Sony D-VJ85 User manual, 36 paginas
MDX-C8900R Manual de usuario    Sony MDX-C8900R Manual de usuario, 186 paginas
HDX266/HDX267W Manual de usuario   Sony HDX266/HDX267W User's Manual, 104 paginas
CDX-M10 Instrucciones de operaciones       Sony CDX-M10 Operating Instructions, 116 paginas
MEX-BT2700 Manual de usuario    Sony MEX-BT2700 User's Manual, 56 paginas
CDP-M555ES Manual de usuario   Sony CDP-M555ES User's Manual, 48 paginas
CDX-M30 Manual de usuario       Sony CDX-M30 User's Manual, 144 paginas
D-E660 Manual de usuario   Sony D-E660 User's Manual, 32 paginas
D-MJ95 Manual de usuario   Sony D-MJ95 User manual, 28 paginas
D-F21 Manual de usuario   Sony D-F21 User manual, 24 paginas
D-E561 Manual de usuario   Sony D-E561 User's Manual, 2 paginas
CDX-434RF Manual de usuario    Sony CDX-434RF User manual, 4 paginas
CDP-CX335 Manual de usuario    Sony CDP-CX335 User manual, 68 paginas
D-E551 Manual de usuario   Sony D-E555 User manual, 2 paginas
CDX-C910 Manual de usuario    Sony CDX-C910 User manual, 62 paginas
HAR-D1000 Manual de usuario   Sony HAR-D1000 User's Manual, 36 paginas
CFD-360 Manual de usuario    Sony CFD-360 User manual, 60 paginas
D-SJ01 Manual de usuario   Sony D-SJ01 User manual, 24 paginas
CFD-577 Manual de usuario   Sony CFD-577 User manual, 36 paginas